When it comes to factories, we know the place too well, because we are the place where we work, work and live. Everything is closely related to us.

The factory water dispenser is an indispensable part of our working life. As for the use and maintenance of the factory water dispenser, I don't think everyone is clear. Let the experts of direct drinking water tell us how to maintain the factory water dispenser.

1. Handle the water dispenser with care. When moving the water dispenser in the factory, try to keep it upright. If it is inclined, the inclination shall not be greater than 45 degrees, and it can only be operated after it has been stationary for a period of time.

2. When the factory water dispenser is used for the first time, clean the containers and pipes of the water dispenser with clean water, then loosen the drain valve, and tighten the drain valve after the residual water is discharged. After adding water, open the tap of warm water, plug in the power supply and turn on the heating switch only when there is water flowing out, so as to avoid dry burning and extend the service life of the machine.

3. If the machine is out of service for a long time, please turn off the machine switch and pull out the power plug, then loosen the drain valve, drain the residual water in the machine, and then tighten the drain valve.

4. Turn off the power when it is not used at night, which can save energy and ensure the security when it is not used.

5. During the operation of the machine, it is suggested that the filter element should be replaced once every six months according to the specific conditions, and the maintenance personnel can be asked to clean the smart seat and inner tank after one year of operation.

6. The water dispenser should be placed in a ventilated place to avoid moisture, direct sunlight and heating. The water dispenser should be about 15 cm away from the wall, and should not be placed close to valuables and other electrical equipment to avoid splashing damage. The water dispenser should be placed smoothly to prevent noise.

7. It is forbidden to use gasoline and other organic solvents to clean the appearance of the machine.

8. If the power cord of the water dispenser is damaged, replace the suitable cord or contact the dealer. The machine must use socket with grounding device and leakage protector to avoid electrification of the shell.

9. Remember that children are not allowed to play around the water dispenser. If necessary, the hot water tap can be replaced with a security type tap to avoid scalding children

10. Do not put the metal rod into the back panel ventilation window to avoid damaging the fan or causing electric shock; do not cover the fan ventilation window to avoid damaging the semiconductor refrigeration module due to poor exhaust and poor heat dissipation.

Article source: Jiangmen drinking water equipmenthttp://www.jmhz-union.com