Installation steps of Jiangmen water dispenser
1. In order to ensure that the water purifier meets the application requirements of customers, the installation personnel shall ensure that the water quality, pressure, flow rate and water temperature of the water purifier meet the requirements of the product performance parameter table. If the influent water quality is not municipal tap water, it is necessary to add a pre filtration device in front of the water purifier. If the inlet pressure is too high (over 3kg), it is necessary to install a pressure reducing valve in front of the water purifier. If the inlet pressure is too small (less than 1kg), a booster pump needs to be installed in front of the water purifier. When the water purifier needs to be installed in front of the hot temperature device such as the water heater, the orientation of the water purifier should be lower than that of the water heater, so as to prevent the steam in the water purifier from entering the water purifier and damaging the filter element of the water purifier.
2. All pipes, joints, taps and other water related accessories on the water purifier shall comply with the national health standards.
3. Please do not install it outdoors in northern areas to avoid frost cracking and direct sunlight.
4. Do not use too much force when tightening the threaded joint to avoid thread slippage.
Article source: Jiangmen water dispenserhttp://www.jmhz-union.com
-
04-06
Development history of boiling water machine
The internal structure of the first generation of boiling water machine is simple, which can be divided into: box (for water storage and boiling), floating ball (for water level control) and heating pipe (for heating). In the process of using, people find that there is only one water tank, which can't separate raw water from boiled water; there is only one floating ball as the water level control, which can't control the raw water into the water tank when people take water. At the same time, bec
-
04-06
Precautions for use of drinking water equipment in factory
When it comes to factories, we know the place too well, because we are the place where we work, work and live. Everything is closely related to us. The factory water dispenser is an indispensable part of our working life. As for the use and maintenance of the factory water dispenser, I don't think everyone is clear. Let the experts of direct drinking water tell us how to maintain the factory water dispenser. 1. Handle the water dispenser with care. When moving the water dispenser in the factory,
-
04-06
Suggestions on daily life of Jiangmen drinking water equipment manufacturers
1. About diet 1. Stay away from tobacco and alcohol 2. Pay attention to breakfast 3. Eat 7 minutes full 4. Eat more vegetables and grains 5. Drink less carbonated drinks 6. Drink more water 7. Eat less leftovers to reduce cancer risk 8. Eat more lean meat and less salt 2. About sports 1. Enjoy more sunshine at 8 a.m. 2 Exercise for half an hour every day 3. Walk or jog after meals 4. Rest for half an hour after exercise and then take a bath 5. Plan to travel once a year 3. About days 1. Go to be
-
04-06
How to choose a commercial water dispenser?
Function 1: direct drinking device commercial direct drinking machine can not only improve the water quality, but also make our life more convenient. Tap water that can be drunk directly can not only save time, but also taste sweeter. Let us no longer need to spend time boiling water and then cool, and do not have to endure the light taste of boiling water after cooling. So now many people in the choice of commercial drinking water machine time, will choose to have a direct function of drinking